Installation
46
A
4. Unscrew the clips on the right and left and remove
them. (Fig. C) Remove the panel.
C
Clean the panels with glass cleaner and a soft cloth.
Do not use sharp or abrasive materials or a glass
scraper. The glass could be damaged.
During installation, make sure that the lettering
"Right above" is upside down at the bottom left.
1. Insert the panel diagonally towards the back.
(Fig. A)
2. Attach the clips on the right and left and screw
tight. (Fig. B)
3. Insert the uppermost panel diagonally towards the
back. The smooth surface must face outwards.
A
B
B