Technical Support - Siemens SITRANS RD500 Operating Instructions Manual

The Manual
Notes:
• This product is intended for use in industrial areas. Operation of this equipment in a
residential area may cause interference to several frequency based
communications.
• Please follow the installation and operating procedures for a quick, trouble-free
installation and to ensure the maximum accuracy and reliability of your SITRANS RD500
application.
• This manual applies to the SITRANS RD500 application only.
This manual will help you set up your SITRANS RD500 for optimum performance. We
always welcome suggestions and comments about manual content, design, and
accessibility. Please direct your comments to techpubs.smpi@siemens.com.
For other Siemens Milltronics level measurement manuals, go to:
www.siemens.com/level and look under Level Measurement.

Technical Support

Support is available 24 hours a day.
To find your local Siemens Automation Office address, phone number and fax number go
to:
www.siemens.com/automation/partner
• Click on the tab Contacts by Product then drill down to find your product group
(+Process Automation > +Process Instrumentation > +Level Measuring
Instruments).
• Select the team Technical Support. Click on Next.
• Click on the appropriate continent, then select the country followed by the city.
Click on Next.
For on-line technical support go to:
www.siemens.com/automation/support-request
• Enter the device name (SITRANS RD500) or order number, then click on Search,
and select the appropriate product type. Click on Next.
• You will be prompted to enter a keyword describing your issue. Then either
browse the relevant documentation, or click on Next to email a detailed
description of your issue to Siemens Technical Support staff.
Siemens A&D Technical Support Center: phone
Page 2 SITRANS RD500 – OPERATING INSTRUCTIONS
+49 180 50 50 222
fax +49 180 50 50 223
7ML19985MA01