Setting The Hotel Option Data - Samsung 680 Installation Manual

To Enter: Press the MUTE
set.)
To Exit from this menu : power off and turn on again.
✎ Depending on Model and Region, some menus do not exist on the TV set.
✎ Hotel factory menu is for Hotel option data setting only. Normal user operation should be strictly prohibited.
Hotel TV Function
No
Category
1 Hospitality Mode
2 SI Vendor
Power On Channel
Power On Channel
Power On Channel
Power
3
Power On Volume
On
Power On Volume
Min Volume
Max Volume
Power On Source
Power On Option
Channel Setup
Channel Editor
Mixed Channel
Dynamic SI
4 Channel
Channel Rescan
Mychannel
Genre Editor
28
English

Setting the Hotel Option Data

→ 1 → 1 → 9 → ENTER
initial value
Standalone
OFF
Last Saved
...
Num
...
Type
Last Saved
...
Num
0
100
TV
Last Option
ON
Map
OFF
ON
Message
OFF
...
E buttons in order. (From the Hospitality mode, the Standalone mode is
Description
Select the Hotel TV mode. (Standalone / Interactive)
Select the SI Vendor.
Set the default values that will be applied when the TV is turned on.
‐ User Defined : Lets you set Power On Channel and Channel Type manually.
See Power On Channel and Channel Type below.
‐ Last Saved : If you select this item, when the TV is turned on, it displays
the channel it was displaying when it was turned off.
When the TV is turned on, it switches automatically to this channel.
Provides channel type description for Power On channel selected.
‐ ATV: Selected channel analogue selection(Aerial).
‐ DTV: Selected channel Digital & Antenna selection(Cable).
‐ User Defined : Lets you set the Power On Volume manually. See Power On
Volume below.
‐ Last Saved : When the TV is turned on, it returns to the volume that had
been set when the power had been turned off.
The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Minimum Volume Level setting user can set.
Maximum Volume Level setting user can set.
Select the Input source when TV is turned on initially.
Power On(AC Power On) Option
‐ Standby : Stand-By Mode
‐ Power On : Power On
‐ Last Option : Last Power On State
User can set channel option.
Such as Auto Tunning, Manual Tunning, Antenna setting.
Provided option for editing Channel Name , Number and video.
Mute settings for channels in channel List.
Mix Aerial and Cable Channels
‐ ON: Both of Aerial and Cable can watch and display in Channel Map.
‐ OFF: Through Channel Map only can select Aerial or Cable channel to
watch.
‐ OFF : No Check of the DTV Programme channel information.
(DTV channel editor accessible, but addtional channel Programme number auto
update not supported)
‐ ON : Check the DTV Programme channel information. (DTV channel editor
inaccessible)
This is a display option for the OSD text that appears when a user configures
the country specifications in hotel models. This option determines whether
to activate the items that are only executed after a manual user confirmation
when the notification message is displayed while the country specifications are
being configured.
‐ ON : When TV has an event for setting change because of country spec, It
will be shown on the screen.
‐ OFF : Even TV has an event for setting change, because of country spec, it
will not be shown on the screen.
Set the My channel function ON/OFF.
User can set the genre for searched channel.