Setting The Hotel Option Data - Samsung HG49EE670DKXXU Installation Manual

To Enter: Press the MUTE →
To Exit from this menu: power off and turn on again.
No
Category
1 Hospitality Mode
2 SI Vendor
3 Power On
4 Channel
40
English

Setting the Hotel Option Data

1 → 1 → 9 → ENTER E buttons in that order. (From Hospitality mode, Standalone mode is set.)
Hotel TV Function
Item
Hospitality Mode
SI Vendor
Power On Channel
Power On Channel Num
Power On Channel Type
Power On Volume
Power On Volume Num
Min Volume
Max Volume
Power On Source
Power On Option
Channel Setup
Channel Editor
Initial value
y Select Hospitality Mode.
Standalone y Interactive mode: TV works with an SI STB or SBB.
y Standalone mode: TV works alone, without an SI STB or SBB.
y Interactive mode: Samsung / 26M / Locatel / VDA / VDA-S / Acentic
/ Sustinere / Quadriga / ETV / Ibahn / Magilink / Otrum / Siemens /
OFF
Amino / MDC / Enseo
y Standalone mode: OFF / Movielink / Swisscom / Smoovie / SSCP
Sets the default values that will be applied when the TV is turned on.
y User Defined: Lets you set Power On Channel and Channel Type
Last Saved manually. See Power On Channel Number and Channel Type below.
y Last Saved: If you select this item, when the TV is turned on, it
displays the channel it was displaying when it was turned off.
... When the TV is turned on, it automatically switches to this channel.
y Select channel band: ATV (analog air band), DTV (digital air band),
...
CATV(analog cable band) or CDTV (digital cable band)
y User Defined: Lets you set the Power On Volume manually. See
Power On Volume Number below.
Last Saved
y Last Saved: When the TV is turned on, it returns to the volume that
was set when the power was turned off.
... The TV turns on with this Volume Level.
The minimum Volume Level the user can set in Stand Alone
0
Hospitality mode.
100 The maximum Volume Level the user can set.
TV Select the input source the TV displays when it is turned on.
Determines the TV's state when power returns after a power failure or
after you have unplugged the TV and then plugged it in again.
y Last Option: Returns to its last Power state. If it was in Stand-by, it
Last Option
returns to Stand-by. If it was on, it turns on.
y Power On: When the power returns, the TV turns on.
y Standby: When the power returns, the TV enters the Standby mode.
Gives you direct, immediate access to some of the Channel menu
... functions on the user Channel menu such as Auto Tuning, Manual
Tuning, Antenna setting, etc.
The Channel Editor lets you edit the channels stored in the TV's
memory. Using Channel Editor you can:
y Change the channel numbers and names, and sort the channels in
your desired channel number order.
...
y Apply video mute to channels you select. Video mute blanks out the
video from a channel and outputs only the sound while displaying
a speaker icon on the screen. The Channel Editor also lets you view
information about each channel easily, without having to display
each channel directly.
Description