Table of Contents
Advertisement
To Enter: Press the
→
MUTE
To Exit from this menu : power off and turn on again.
The Hotel Option Date of HD470S
No
Category
1
Hospitality Mode
2
SI Vendor
3
Power On
4
Channel
Setting the Hotel Option Data
→
→
→ ENTERE buttons in order. (From the Hospitality mode, the Standalone mode is set.)
1
1
9
Hotel TV Function
Item
initial value
Hospitality Mode
Standalone
SI Vendor
Power On Channel
Last Saved
Power On Channel Num
Power On Channel Type
Power On Volume
Last Saved
Power On Volume Num
Min Volume
Max Volume
Power On Source
Power On Option
Last Option
Channel Setup
Channel Editor
• Select Hospitality mode.
• Interactive mode : TV works with an SI STB or SBB.
• Stand-alone mode : TV works alone, without an SI STB or SBB.
• Interactive mode : Samsung /2M/ Locatel / VDA / VDA-S / Acentic /
OFF
Sutrinerelone mode : OFF /Movielink/Swisscom/ Smoovie / SSCP
Set the default values that will be applied when the TV is turned on.
• User Defined : Lets you set Power On Channel and Channel Type
manually. See Power On Channel Number and Channel Type below.
• Last Saved : If you select this item, when the TV is turned on, it displays
the channel it was displaying when it was turned off.
When the TV is turned on, it switches automatically to this channel.
...
• Select channel band : ATV (analog air band), DTV (digital air band),
...
CATV(analog cable band), CDTV (digital cable band)
• User Defined : Lets you set the Power On Volume manually. See Power
On Volume Number below.
• Last Saved : When the TV is turned on, it returns to the volume that had
been set when the power had been turned off.
The TV turns on with this Volume Level.
...
The minimum Volume Level the user can set in Stand Alone Hospitality
0
mode.
The maximum Volume Level the user can set.
100
Select the input source the TV displays when turns on.
TV
Determines the TV's state when power returns after a power failure or after
you have unplugged the TV and then plugged it in again.
• Last Option : Returns to its last Power state. If it was in Stand-by, it
returns to Stand-by. If it was on, it turns on.
• Power On : When the power returns, the TV turns on.
• Standby : When the power returns, the TV enters the Standby mode.
Gives you direct, immediate access to some of the Channel menu
functions on the user Channel menu such as Auto Tuning, Manual Tuning,
...
Antenna setting, etc.
The Channel Editor lets you edit the channels stored in the TV's memory.
Using Channel Editor you can:
• Change the channel numbers and names, and sort the channels in your
desired channel number order.
• Apply the video mute to channels you select. The video mute blanks out
...
the video from a channel and outputs only the sound while displaying
a speaker icon on the screen. The Channel Editor also lets you view
information about each channel easily, without your having to display
each channel directly.
Description
English
19
Advertisement
Table of Contents
