Connecting To The Network - Samsung 680 Installation Manual

Connecting to the Network

You can set up your TV so that it can access the SMART TV applications through your local area network (LAN) using a wired
or wireless connection.
‐ After you have "physically" connected your TV to your network, you must configure the network connection to
complete the process. You can configure the connection after the Initial Setup process, through the Hotel Option.
Network Connection - Wireless
You can connect your TV to your local area network (LAN) through a standard wireless router or modem.
Wireless IP Router or Modem
(router having DHCP Server)
The LAN Port on the Wall
LAN Cable (Not Supplied)
This TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you
play video over a network connection, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the network through an
access point or AP (typically a wireless IP Sharer - router or modem) to transmit an encrypted security code called an access
key.
Your TV is compatible with the following security protocols:
• Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK
• Encryption Type: WEP, TKIP, AES
In compliance with the newest Wi-Fi certification specifications, Samsung TVs do not support WEP or TKIP security
encryption in networks running in the 802.11n mode.
18
English