Samsung 680 Installation Manual page 32

Hotel TV Function
No
Category
Door Eye Mode
Door Eye Source
19 Door Eye
Prompt OSD
Source Return
Factory Lock
Password Popup
Password Input
Password Setting
20 Security Mode Password Reset
Security Mode
TTX Security
21 DRM DRM Mode
Self Diagnosis
22 System
Self Diagnosis for
SW Update
Service Pattern
Sound Bar Out
Contact Samsung
Standby LED
‐ If user edit extermal source to channel list, when TV power on by external source, TV does not show my channel OSD after power on. In
menu, the broadcast item is dim, user can choose genre mode by channel list.
‐ When TV in the PC source, Apply picture Mode Keeps dim.
‐ If the hotel does not use cable and aerial antenna both, the Mix Channel Map option should be set as "Off".
32
English
initial value
OFF
...
...
...
Time
OFF
...
...
...
...
USB ...
HDMI ...
...
OFF
for TV
HTV
OFF
OFF
ON
TV Reset
Description
Door Eye function ON and OFF.
Select the source that will display the door image (Source selection is AV).
Prompt OSD mode ON and OFF.
‐ On: The OSD which is asking if you want the output will be displayed.
• If the user press 'Yes', door image will be displayed in PIP or Full screen.
• If the user press 'No', Door Eye function will not work.
‐ Off: OSD will not be displayed and automatically changed to PIP or Full
size screen.
Setting the time that decide how long will be displayed the door image.
Factory Lock On or OFF.
Password Popup On or OFF.
Input Password 00000000.
Set new Password.
Reset Password to 00000000.
Security Mode On or OFF.
USB Disable or Enable.
HDMI Disable or Enable.
TTX Security Disable or Enable.
‐ Configures CAS support.
‐ OFF: Turns off CAS support.
‐ LYNK DRM: Select to turn on S-LYNK DRM CAS support only.
Enter Self Diagnosis Menu.
‐ Picture Test: Use to check for picture problems. If the problem appears in
the test picture, select Yes and follow the directions on the screen.
‐ 3D Picture Test: Use to check for 3D picture problems. If the problem
appears in the test picture, select Yes and follow the directions on the
screen.
‐ Sound Test: Use the built-in melody sound to check for sound problems.
If the problem occurs during the test, select Yes and follow the directions
on the screen.
‐ Channel information: check up every channel information.
‐ Reset: Self Diagnosis for TV state reset.
HD Function Check Menu On Executing Item Below OSD is diaplayed.
‐ STB SI Vendor Setting: SI Name Success/Failure
‐ Bathroom AMP: Success/Failure
‐ RTC: Success/Failure
SW USB Update function.
Same function with SVC Service Pattern.
‐ ON: TV speaker sound will be mute. Sound will come out through HDMI.
You must connect the Sound Bar to hear the sound(HDMI3).
‐ OFF: Sound will come out through TV speakers normally.
Samsung Contac information.
Standby LED On or OFF.
Factory reset.