Charge the Flight Battery
NOTICE: Inspect the battery to make sure it is not damaged e.g., swollen, bent, broken
or punctured. Only charge batteries that are cool to the touch and are not damaged.
Insert the charger into a USB port.
Connect the battery to the charger.
CHARGING (Solid Red LED)
MAX CHARGE (LED OFF )
Disconnect the fl ight battery from the charger immediately upon completion of charging.
CAUTION: Only use chargers specifi cally designed to charge the included Li-Po
battery. Failure to do so could result in fi re, causing injury or property damage.
CAUTION: Never exceed the recommended charge rate.
CAUTION: Once charging is complete, immediately remove the battery.
Never leave a battery connected to the charger.
Installing the Transmitter Batteries (RTF)
Replace the transmitter batteries when the transmitter beeps continuously.
SOLID RED LED
–Charging
USB Li-Po
LED OFF
Charger
–Charge
Complete
DC Input:5.0V 350mA
EFLC1008
DC Output:4.2V 300mA
7
EN