Disassembly Instructions - Carrier 40MBQB09D-3 Service Manual

DISASSEMBLY INSTRUCTIONS (CONT)
3 Remove the
PCB
4 Remove the
fan capacitor
4 Move the display board Move the display board
according to the arrow's
direction to disassemble.
1 Remove the electronic
control box cover.
2 Remove all the plugs or
connectors connected to
the PCB and remove the
ground wire after removing
the screw.
3 Remove the PCB from the
electronic control box.
1 Remove the electronic
control box cover.
2 Disconnect the fan
capacity wire.
Unscrew the screw and
3
remove it.
Repeat step 1 of No. 1
Repeat step 1 of No 1.
Repeat step 2 of No 1.
39
Press the four
fixing holders
from the four
corners to
remove the
PCB.
PCB
1 screw