Specifications; Safety Instructions - Makita BFT040F Instruction Manual

ENGLISH
1 Battery cartridge
2 Button
3 Red part
4 Indicator lamp
5 Capacity
6 Switch trigger
7 Reversing switch lever
8 Front lamp

SPECIFICATIONS

Model
Hard joint
Fastening
torque
Soft joint
No load speed (min
Dimensions
Net weight
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for screwdriving in wood, metal and
plastic.

SAFETY INSTRUCTIONS

WARNING! When using battery operated tools
basic safety precautions, including the following,
should be followed to reduce the risk of fire, leak-
ing batteries and personal injury: Read these
instructions before operating this product and
save these instructions.
For safe operation:
1. Keep work area clean
– Cluttered areas and benches invite injuries.
2. Consider the work environment.
– Do not expose the tool to rain. Keep work area well
lit. Do not use tools in the presence of flammable
liquids or gases.
3. Keep children away
– Do not let visitors touch the tool. Keep visitors
away from work area.
6
Explanation of general view
9 LED indicator
10 Adjusting ring
11 Ring
12 Scale
13 Adjusting grip
14 Hole for adjusting grip
15 Yellow line
16 Compression spring
BFT040F
1 – 4 N•m
1 – 3.5 N•m
-1
) 950
200 mm x 65 mm x 251 mm
(with Battery Cartridge BH9020/BH9020A)
200 mm x 65 mm x 274 mm
(with Battery Cartridge BH9033/BH9033A)
(with Battery Cartridge BH9020/BH9020A)
(with Battery Cartridge BH9033/BH9033A)
BFT080F BFT122F
3 – 8 N•m 5 – 12 N•m
3 – 6.5 N•m 5 – 10 N•m
540 320
1.3 kg
1.5 kg
D.C. 9.6 V
4. Store batteries or idle tools
– When not in use, tools and batteries should be
stored separately in a dry, high or locked up place,
out of reach of children.
– Ensure that battery terminals cannot be shorted
by other metal parts such as screws, nails, etc.
5. Do not force the tool
– It will do the job better and safer at the rate for
which it was intended.
6. Use the right tool
– Do not force small tools or attachments to do the
job of a heavy duty tools. Do not use tools for pur-
poses not intended.
7. Dress properly
– Do not wear loose clothing or jewellery, they can
be caught in moving parts. Non-skid footwear is
recommended when working outdoors. Wear pro-
tecting hair covering to contain long hair.
8. Use protective equipment
– Use safety glasses and if the cutting operation is
dusty, a face or dust mask.
9. Connect dust extraction equipment
– If devices are provided for the connection of dust
extraction and collection ensure these are con-
nected and properly used.
10. Do not abuse the supply cord (if fitted)
– Never carry the tool by the cord or yank it to dis-
connect from the socket. Keep the cord away from
heat, oil and sharp edges.
17 Bit
18 Sleeve
19 Range of fastening capacity
20 Revolution angle (°)
21 Torque (N•m)
22 Limit mark
23 Brush holder cap
24 Screwdriver
BFT123F
5 – 12 N•m
5 – 12 N•m
390
200 mm x 71 mm x 260 mm
(with Battery Cartridge BH1220)
200 mm x 71 mm x 283 mm
(with Battery Cartridge BH1233)
1.6 kg
(with Battery Cartridge BH1220)
1.8 kg
(with Battery Cartridge BH1233)
D.C. 12 V