Warranty Information - General MMD4E User Manual

• Replace the pin cap and black rubber protection sleeves
after making measurements 1) for safety reasons and
2) to avoid bending or dulling the pins.
• After subjecting the meter to a large change in ambient
temperature, wait at least 30 minutes before making
measurements to guarantee the accuracy of readings.
• Remove the battery when storing the unit or when you do
not expect to use it for an extended period of time (months
rather than weeks).
• Do not drop or disassemble the MMD4E or immerse it in
water. Doing so voids the 1-year limited warranty.

WARRANTY INFORMATION

In the U.S, General warrants its instruments and accessories
against defects in material or workmanship for one year from
the date of purchase. General will replace or repair the
defective unit, at its option, subject to verification of the
defect.
This warranty does not apply to defects resulting from abuse,
neglect, accident, unauthorized repair, alteration, or
unreasonable use of the product.
Any implied warranties arising from the sale of a General
product, including but not limited to implied warranties of
merchantability and fitness for a particular purpose, are
limited to the above. General shall not be liable for loss of use
of the product or other incidental or consequential damages,
expenses, or economic loss, or for any claim of such damage,
expenses, or economic loss.
State laws vary. The above limitations or exclusions may not
apply to you.
9