设置未保存 - Lexmark 5400 SERIES User Manual

Remote Fax Error
(lower the transmission speed)
Some photos removed from card by
host.
There is a problem reading the
memory card.
设置未保存
在当前的作业中设置超时
设置没有为以后的作业保存 如果您按
1
From the control panel, press Fax Mode.
2
Press
3
Press
4
Press .
5
Press
appears.
6
Press .
7
Press
appears.
8
Press .
9
Press
10
Press .
注意：
•
•
11
Resend the fax.
If the problem persists, repeat 步骤 1 through 步骤 11 to
12
send the fax at successively lower transmission speeds.
Some of the photos on the photo proof sheet were deleted
from the memory card through the computer.
You must print a new photo proof sheet.
For more information, see 第 57 页"使用样张页打印保存在
存储设备中的照片".
See 第 111 页"存储卡无法插入".
•
See 第 111 页"插入存储卡后没有任何反应".
•
如果您按 按钮选择设置，所选的设置旁边将会出现*标记。打印机将会在不使
用 2 分钟之后或者关闭电源之后恢复默认设置。有关如何改变此时限设置的帮
助信息，请参阅第 30 页"保存设置"。
按钮选择设置，所选的设置旁边将会出现*标记。有关如何保存设置
的帮助信息，请参阅第 30 页"保存设置"。
Troubleshooting
119
.
or repeatedly until Fax Setup appears.
or repeatedly until Dialing and Sending
or repeatedly until Max Send Speed
or repeatedly until a lower speed appears.
The lower the transmission speed, the longer it will
take your fax to print.
This solution will reduce the speed for future faxes
until you reset the transmission speed.