KAM Gobolaser 550RB Instruction Manual

Red & blue burst grating shutter fx laser

Gobolaser 550RB

Red & blue burst grating shutter FX laser

M A N U A L

V E R S I O N

1 . 0

2 5 - 1 1 - 1 1

Due to continuous product development, please ensure that you have downloaded

the latest instruction manual for this product from the Kam website at www.kam.co.uk

For the latest updates and information on the entire Kam range visit:

www.kam.co.uk

Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ

Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com

If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.

Due to continuous product development, specifications and appearance are subject to change. © Copyright Lamba plc 2011. E&OE.

Table of Contents

Need help?

Do you have a question about the Gobolaser 550RB and is the answer not in the manual?

Page 1 For the latest updates and information on the entire Kam range visit: www.kam.co.uk Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.
Page 2 Thank you for purchasing this Kam product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. Please retain them for future reference.This unit has been tested at the factory before being shipped to you.
Page 3 Front & rear panel guide Laser aperture Sound sensitivity adjustment Built-in microphone Power LED Mains power input On/Off power switch Sound mode / Auto mode selector switch Sound sensitivity adjustment Safety key lock Package contents Laser unit, mains lead, safety key, instruction manual, laser safety guide...
Page 4 Operation Plug the unit into a suitable mains power supply. Turn the On/Off power switch to the ON position. Ensure that the key is located in the safety key lock. Ensure the safety key lock is turned to the ON position. Select desired function mode using the selector switch (7).