Page 1
For the latest updates and information on the entire Kam range visit: www.kam.co.uk Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com...
Page 2
Thank you for purchasing this Kam product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. Please retain them for future reference. This unit has been tested at the factory before being shipped to you.
Page 3
9. In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact your Authorised Kam Retailer. Always use the same type of spare parts.
Page 4
Remote control pairing If for some reason the remote control and smoke machine aren’t ‘communicating’ you may need to re-pair the two. Start by turning the smoke machine off for ten seconds, then turn on the unit, whilst the unit is starting up, press and hold down either button on the remote control until the LED display on the rear of the unit flashes twice to indicate a pairing.
Page 5
DMX512 operation The smoke machine is equipped with 8 control channels. To be able to operate the machine with a DMX controller, the DMX starting address must be set for the first DMX channel. To achieve this, press the button MENU so many times until “Addr“ is indicated in the display.
Page 6
Fluid sensor on and off To protect the pump, the machine uses a infrared fluid sensor to test if there is smoke fluid in the tube. If the sensor detects that there is not enough fluid in the tube, the machine will enter a protection mode after about 20 seconds and it will shut the pump down. The display will then start flashing.
Page 7
Try resetting the smoke machine by turning the power off and then on again. Fluid indicator states no smoke but the container if full Possible faulty part. Contact retailer/distributor for further instructions. Specifications and features Model Kam KSM Vegas LED Power supply 230V AC - 50Hz Power 1500W Fuse...
Need help?
Do you have a question about the KSM Vegas LED and is the answer not in the manual?
Questions and answers