Huawei EchoLife HG520 User Manual page 76

RTS Threshold: It is 2347 by default. The range is 0–2347
bytes.
If there is inconsistent data flow, you can make slight
adjustment of this value.
If the network packet is smaller than the RTS threshold,
RTS/CTS will not be enabled.
HG520 sends Request to Send (RTS) to a particular
receiving station and negotiates the transmission of data
frame.
After receiving an RTS, the wireless station responds with a
Clear to Send (CTS) frame to acknowledge the transmission.
Then the transmission begins.
DTIM Interval: The range is 1–255 milliseconds. It is the
interval of Delivery Traffic Indication Message (DTIM).
DTIM interval is in countdown mode. It informs clients to
listen to broadcast messages.
When HG520 has stored broadcast information for clients, it
sends the next DTIM according to the DTIM Interval.
Clients receive the beacon and begin to receive the
broadcast message. It is 1 by default.
Beacon Interval: The range is 50–2000 milliseconds.
The Beacon Interval is the frequency interval of the beacon.
A beacon is a packet broadcast by HG520 to synchronize
the wireless network. It is 100 by default.
XPress™ Technology: this technology can improve the
data transmission rate. By default, it is disabled.
54g™ Mode: There are 3 options:
Select 54g Auto for wide compatibility.
Select 54g Performance for the fastest performance.
Huawei Technologies Proprietary
70