Huawei EchoLife HG520 User Manual page 67

IV. WPA-PSK/WPA2-PSK configuration
WPA-PSK is used when there is no RADIUS server activated.
Figure 4-42 Wireless Setup — Security — WPA-PSK
1. Select WPA-PSK in Network Authentication to enable it.
2. Enter 8 to 63 ASCII codes or 64 hexadecimal (0–9, A–F) digits in
WPA Pre-Shared Key. If you forget the key, simply click Click
here to display and the key will show.
3. WPA Group Rekey Interval: The interval is estimated in second.
The default value is 0 (no re-keying).
4. WPA Encryption: Select from TKIP, AES and TKIP+AES.
5. WEP Encryption: Default is disabled.
Huawei Technologies Proprietary
61