Huawei EchoLife HG520 User Manual page 18

Wall socket: Plug one end of the twisted-pair cable
(standard phone line) into the ADSL port on the rear panel of
HG520 and insert the other end into the wall socket.
External splitter: Or you can insert one end of the
twisted-pair ADSL cable into the modem connector on the
external splitter.
Insert the other end into the ADSL connector on the back
panel of HG520.
After installed, you can connect telephone to the phone
connector on the external splitter.
III. Connect HG520 to your computer – Use an Ethernet cable
provided to connect HG520 and your computer or notebook PC
through the 10/100Base-TX Ethernet ports.
IV. Connect the power supply and start up HG520– Use the
power adapter supplied and switch the power switch to the ON
position. The Power LED indicator lights up and remain lit. Check and
make sure the electronic current and voltage meet the requirement of
the supplied power adapter. Check and make sure that the LAN: LINK
and ADSL: LINK LED indicators light up in green. This indicates a
successful connection between the ISP and the user's PC.
Note:
Please note that the cable supplied is the straight-through cable. Be sure that the
cable connected between LAN and HG520 does not exceed 100 meters.
Use crossover cable to connect HG520 and the uplink port of a switch or hub.
Huawei Technologies Proprietary
12