temporal key integrity protocol (TKIP) and advanced encryption
standard (AES), whose functions can be enabled via the WPA
configuration.
And Similar to 802.1X, WPA must work with RADIUS server.
Figure 4-40 Wireless Setup — Security — WPA
1. Enable WPA. Follow the steps below to set the parameters:
Select WPA from Network Authentication.
WPA Group Rekey Interval: The interval is estimated in
second. The default value is 0 (no re-keying).
RADIUS Server IP Address/Port/Key: Make sure it
matches the settings of your RADIUS server.
Huawei Technologies Proprietary
58