Firebricks installation
Back firebricks installation
1) Place 4 bricks «A» and 1 brick «C» in the middle.
2) Set the 3 big screws in the holes for this purpose. Do not
tighten up these screws too much, so that washers will be
easily installed.
3) Add two bricks «A» horizontally on the 5 bricks.
4) Tighten the 3 screws.
November 5, 2015
Side firebricks installation
1) Put 3 bricks «A» on the right hand.
2) Place 2 screws and insert split washers.
3) Tighten the screws.
4) Repeat the same 3 steps to make the other side.
11