GETTING STARTED USB PLAYER BLUETOOTH CONNECTIVITY FRONT PANEL BLUETOOTH (MX300 USBW) BACK PANEL REPLACING THE CROSSFADER SPECIFICATIONS APPENDIX APPLICATIONS DIMENSIONS BLOCK DIAGRAMS Phonic preserves the right to improve or alter any information within this document without prior notice MX300USB / MX300USBW...
Congratulations on your purchase of a Phonic MX DJ mixer 1. Before turning the power on, set the Master output – MX300 USB or MX300 USBW. Now using your Phonic DJ control on each channel all the way down. mixer, you’ll be able to hit a break, add a sample or just run 2.
Make sure be attenuated by 14 dB, so that the microphone can be that the PHONO/LINE/MIC switch is set to MIC. clearly heard. In the OFF position, all signals returns to their original level. MX300USB / MX300USBW...
Page 7
Phonic recommends that users 8. Master Level / Cue Level Display format their USB flash drives using a FAT-32 file system.
Unscrew and remove the two outer screws on the fader panel. Remove the fader and unplug the cable connected to it. Replace with the new fader and fix it to the device with the screws. Connect the new fader and fix it to the mixer. MX300USB / MX300USBW...
Middle 1 kHz, -30dB - 15dB Bass 40 Hz, -30dB - 15 dB Power Supply 115/230V, 50/60Hz Power Consumption Dimensions (WxDxH) 254 x 320 x 99 mm (10" x 12.6" x 3.9") Weight 3.5 kg (7.7 lbs) MX300USB / MX300USBW...
Phonic, at its option, shall repair or replace the defective unit covered by this warranty. Please retain the dated sales receipt as evidence of the date of purchase.
Page 11
APPLICATION MICROPHONE RECORD PLAYER CD PLAYER SPEAKERS MX300USB / MX300USBW MX300USB / MX300USBW...
Page 12
DIMENSION 254mm/10” measurements are shown in mm/inches MX300USB / MX300USBW...
Need help?
Do you have a question about the MX300USB and is the answer not in the manual?
Questions and answers