How To Copy The Backup Data (When Reusing A Second-Hand Assy); Formation Of A Fhd Digital Assy (Re-Service Part ) - Pioneer PDP-5000EX Service Manual

5

7.3.2 HOW TO COPY THE BACKUP DATA (when reusing a second-hand Assy)

When replacing the FHD DIGITAL Assy with one that was mounted on another product, copy the backup data,
as shown below:
Command: FAJ command
(Be effective between FAY command)
Factory Menu:
PANEL INFORMATION
ETC. (+)
BACKUP DATA : NO OPRT
DIGITAL EEPROM : NO OPRT
DIGITAL EEPROM : REPAIR

7.3.3 FORMATION OF A FHD DIGITAL ASSY (RE-SERVICE PART )

How to adjust the FHD DIGITAL Assy that is mounted on one product so that it can be mounted
on another product
When adjusting the FHD DIGITAL Assy that is mounted on one product so that it can be mounted on another product,
proceed as follows:
Command: UAJ command
(Be effective between FAY command)
Factory Menu:
PANEL INFORMATION
ETC. (+)
BACKUP DATA : NO OPRT
DIGITAL EEPROM : NO OPRT
DIGITAL EEPROM : DELETE
Note:
If the secondhand FHD DIGITAL Assy is mounted in the product then the unit is turned on then back off again, the
data in the EEPROM on the FHD DIGITAL Assy are copied over the EEPROM in the PANEL SENSOR Assy.
5
6
(down)
(down)
(set)
(down)
(right)
(set)(5 sec)
(down)
(down)
(set)
(down)
(right)
(set)(5 sec)
PDP-5000EX
6
7
7
8
A
B
C
D
E
F
103
8