Installing Optional Cards In The Kx-Tvm50 - Panasonic KX-TVM50 Getting Started

2.5 Installing Optional Cards in the KX-TVM50

2.5 Installing Optional Cards in the KX-TVM50
Follow these steps if you plan to install an optional KX-TVM502 2-Port Hybrid Expansion Card or
KX-TVM594 LAN Interface Card in the KX-TVM50.
Installing a 2-Port Hybrid Expansion Card
1.
Position the front of the card so that the jacks fit in the open slot. Holding the card firmly in place, lower the
other end of the card so that the card's hole fits over the extension bolt.
CAUTION
When installing optional cards, do not put pressure on the main board. Doing so may result in damage
to the VPS.
Extension Bolt
2.
Insert and tighten the screws as shown.
10 Getting Started
1
2
Screw
Document Version 2.1 2008/04