Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Chicago Pneumatic MS 695
Summary of Contents for Chicago Pneumatic MS 695
- Page 1 Safety and operating instructions Rammer MS 695 www.cp.com...
- Page 2 MS 695 9800 1662 01 | Original instructions...
-
Page 3: Table Of Contents
MS 695 Contents Contents Introduction............... 5 About the Safety and operating instructions. - Page 4 Safety and operating instructions MS 695 9800 1662 01 | Original instructions...
-
Page 5: Introduction
MS 695 Safety and operating instructions Introduction Thank you for choosing Chicago Pneumatic brand products. For over a century, the Chicago Pneumatic brand has represented performance and innovation in the pneumatic tool industry. Today the brand is found around the world on a range of pneumatic and hydraulic tools that includes breakers, rock drills, chipping hammers, clay-diggers, picks and busters, scabblers, pumps and a whole lot more. -
Page 6: Safety Instructions
Safety and operating instructions MS 695 > Appropriate work overall or similar clothing (not Safety instructions loose-fitting) that covers your arms and legs. To reduce the risk of serious injury or death to Drugs, alcohol or medication yourself or others, read and understand the Safety... - Page 7 MS 695 Safety and operating instructions ► Never overfill the fuel tank. WARNING Dust and fume hazard Dusts and/or fumes generated or dispersed when Make sure the filler cap is screwed on when the ► using the machine may cause serious and permanent machine is used.
- Page 8 Safety and operating instructions MS 695 ► Avoid eating, drinking, and using tobacco WARNING Motion hazards products in areas where there is dust or fumes. When using the machine to perform work-related activities, you may experience discomfort in the Wash your hands and face thoroughly as soon as ►...
-
Page 9: Transport, Precautions
MS 695 Safety and operating instructions ► Make sure that the rammer shoe is ► Make sure that there is no danger before well-maintained , not worn out, and of the proper continuing. size. Rammer shoes that are not well-maintained,... -
Page 10: Maintenance, Precautions
Safety and operating instructions MS 695 Maintenance, precautions WARNING Machine modification Any machine modification may result in bodily injuries to yourself or others. Never modify the machine. Modified machines ► are not covered by warranty or product liability. Always use original parts, cutting blades/working ►... -
Page 11: Overview
MS 695 Safety and operating instructions Overview Main parts To reduce the risk of serious injury or death to yourself or others, read the Safety instructions section found on the previous pages of this manual before operating the machine. Design and function MS rammers are designed for the compaction of fill, including fill that contains clay. -
Page 12: Labels
Safety and operating instructions MS 695 Spring-loaded leg oil, sight glass Labels The machine is fitted with labels containing important information about personal safety and machine maintenance. The labels must be in such condition that they are easy to read. New labels can be ordered from the spare parts list. - Page 13 MS 695 Safety and operating instructions Warning label - Compressed spring package Data plate Read the service manual. Warning label - Hot surfaces Machine type Machine serial number Operating mass according to EN500 Rated engine power Never touch the silencer and exhaust system.
- Page 14 Safety and operating instructions MS 695 Fuel label Start label Fuel tap label Start label on fuel tank Working mode. Start and idling. Stop, transport, and refuelling. Engine choke and primer pump label Read the instruction manual. Open the fuel tap.
-
Page 15: Transport
MS 695 Safety and operating instructions Emission control information label 1. Set the throttle and engine switch control in stop mode (A). Transport WARNING Transport During transportation the machine can overturn and cause serious injury. Always strap the machine down. -
Page 16: Lifting
Safety and operating instructions MS 695 5. When moving short distances, the machine can 1. Always use the machine's lifting eye (A) to lift be tilted forward, so that it rests on the plastic the machine. wheels on the handle. Lift with the lower lifting handle (D) and roll the machine forwards and backwards. -
Page 17: Operation
MS 695 Safety and operating instructions Filling procedure We recommend that you also read the detailed engine instructions supplied with the machine. 1. Stop the engine and let it cool down before filling the tank. 1. The rammer must be standing straight up when the oil level is checked in the engine. - Page 18 Safety and operating instructions MS 695 Throttle and engine switch control Starting the engine 1. Set the throttle and engine switch control (A) in starting mode. 2. Open the fuel tap (B) Working mode position Throttle control fully opened Engine switch in position ON...
-
Page 19: Operating
MS 695 Safety and operating instructions 4. Close the choke (D) if the engine is cold; if the 7. Allow the engine to idle for a few minutes before engine is warm or the ambient temperature is increasing to full power. -
Page 20: Start Label On Fuel Tank
Safety and operating instructions MS 695 ♦ Operate the rammer on a level surface. Start label on fuel tank Never operate on hard surfaces (solid rock, ♦ hardened concrete etc). Steer the machine with the handle. ♦ Excessive pressure on the handle will result in ♦... -
Page 21: When Taking A Break
MS 695 Safety and operating instructions Operating ♦ Before starting maintenance on the machine, clean it in order to avoid exposure to hazardous 1. Set the throttle and engine switch control (A) in substances. See “Dust and fume hazard”. working mode, and the rammer will start to move forward. -
Page 22: After The First 20 Hours Of Operation
Safety and operating instructions MS 695 ♦ Check the oil level in the spring-loaded leg. Check and clean the air filter Check the air filter indicator. ♦ Checking the engine Check the oil level on the dipstick. Check the fuel level. -
Page 23: Every 100 Hours Of Operation
MS 695 Safety and operating instructions ♦ Check the engine speed. Changing the oil in the spring-loaded leg Tighten the bolt joints on the rammer shoe. ♦ Changing the engine oil 1. Unscrew the oil drain plug (A). 2. Empty the oil into a container. -
Page 24: Every 500 Hours Of Operation (Yearly)
Safety and operating instructions MS 695 Checking the spark plug Checking the hood knob Check and clean and if necessary replace the spark Check that the hood knob (A) is in good condition. plug (A). Disposal Every 500 hours of... -
Page 25: Technical Data
MS 695 Safety and operating instructions Technical data Machine data MS 695 Rammer leg width 280 mm (11 in.) Engine Manufacture/Model Honda GXR 120, 4-stroke, manual start Power kW (hp) 2.6 (3.48) Rated speed (r.p.m) 3,750 Idling (r.p.m) 1,600-1,900 Compaction data Vibration frequency, Hz (r.p.m) -
Page 26: Noise And Vibration Data
Safety and operating instructions MS 695 Noise and vibration data Noise Vibration Declared values Declared values Sound pressure Sound power Three axes values EN ISO 11201 2000/14/EC EN 500-4:2011 permitted at operator's guaranteed measured dB(A) working value Type dB(A) rel 1pW... -
Page 27: Dimensions
MS 695 Safety and operating instructions Dimensions mm (in.) *Contact area, m (sq feet). 9800 1662 01 | Original instructions... -
Page 28: Ec Declaration Of Conformity
Safety and operating instructions MS 695 EC Declaration of Conformity EC Declaration of Conformity (EC Directive 2006/42/EC) We, Construction Tools EOOD, hereby declare that the machines listed below conform to the provisions of EC Directive 2006/42/EC (Machinery Directive) and 2000/14/EC (Noise Directive), and the harmonised standards mentioned below. - Page 29 MS 695 9800 1662 01 | Original instructions...
- Page 30 MS 695 9800 1662 01 | Original instructions...
- Page 31 MS 695 9800 1662 01 | Original instructions...
- Page 32 2014-11 | No. 9800 1662 01 © Copyright Construction Tools EOOD...
Need help?
Do you have a question about the MS 695 and is the answer not in the manual?
Questions and answers