Page 1
• Toll Free: 888-883-5144 Safety and operating instructions Forward and reversible plate MV 500 Valid from serial number MV 500 Hatz Electric start 850 mm BGF0002700...
Safety and operating instructions www.CrowderSupply.com • Toll Free: 888-883-5144 Introduction Thank you for choosing Chicago Pneumatic brand products. For over a century, the Chicago Pneumatic brand has represented performance and innovation in the pneumatic tool industry. Today the brand is found around the world on a range of pneumatic and hydraulic tools that includes breakers, rock drills, chipping hammers, clay-diggers, picks and busters, scabblers, pumps and a whole lot more.
Safety and operating instructions MV 500 www.CrowderSupply.com • Toll Free: 888-883-5144 > Appropriate work overall or similar clothing (not Safety instructions loose-fitting) that covers your arms and legs. To reduce the risk of serious injury or death to Drugs, alcohol or medication...
Page 7
MV 500 Safety and operating instructions www.CrowderSupply.com • Toll Free: 888-883-5144 Never overfill the fuel tank. ► WARNING Dust and fume hazard Dusts and/or fumes generated or dispersed when ► Make sure the filler cap is screwed on when the using the machine may cause serious and permanent machine is used.
Page 8
Safety and operating instructions MV 500 www.CrowderSupply.com • Toll Free: 888-883-5144 Avoid eating, drinking, and using tobacco ► WARNING Projectiles products in areas where there is dust or fumes. Failure of the work piece, of accessories, or even of the machine itself may generate high velocity Wash your hands and face thoroughly as soon as ►...
Page 9
MV 500 Safety and operating instructions www.CrowderSupply.com • Toll Free: 888-883-5144 WARNING Vibration hazards WARNING Trapping hazard Normal and proper use of the machine exposes the There is a risk of neck ware, hair, gloves, and clothes operator to vibration. Regular and frequent exposure...
Safety and operating instructions MV 500 www.CrowderSupply.com • Toll Free: 888-883-5144 Transport, precautions WARNING Loading and unloading hazard When the machine is lifted by a crane and similar appliance, this can lead to injury. Use marked lifting points. ► ►...
MV 500 Safety and operating instructions www.CrowderSupply.com • Toll Free: 888-883-5144 Shock absorber Overview To reduce the risk of serious injury or death to yourself or others, read the Safety instructions section found on the previous pages of this manual before operating the machine.
Safety and operating instructions MV 500 www.CrowderSupply.com • Toll Free: 888-883-5144 The label indicates the guaranteed noise level Labels corresponding to EC-directive 2000/14/EC. See "Technical data" for accurate noise level. The machine is fitted with labels containing important information about personal safety and Safety label machine maintenance.
MV 500 Safety and operating instructions www.CrowderSupply.com • Toll Free: 888-883-5144 Use ear protectors label Secure transport WARNING Transport hazard During transportation always strap the machine securely, otherwise it can cause injury. ► Place lashing straps in a U-shape around the bottom plate and secure both front and rear.
Safety and operating instructions MV 500 www.CrowderSupply.com • Toll Free: 888-883-5144 Filling procedure 1. Stop the engine and let it cool down before filling the tank. 2. Release the filler cap slowly to let any pressure escape. 3. Fill the fuel tank to the lower edge of the filler pipe.
MV 500 Safety and operating instructions www.CrowderSupply.com • Toll Free: 888-883-5144 Never work on slopes that exceed the capabilities Before starting, Hatz ♦ of the machine. The maximum slope of the Follow the general safety precautions supplied with machine in operation is 20° (depending on the the machine at the delivery.
Page 16
Safety and operating instructions MV 500 www.CrowderSupply.com • Toll Free: 888-883-5144 Starting the engine, manual start Starting the engine, electric start 1. Pull up the automatic decompression device to 1. Set the throttle control to half throttle. the starting position.
MV 500 Safety and operating instructions www.CrowderSupply.com • Toll Free: 888-883-5144 Stopping the engine, manual start Stopping the engine, Hatz 1. Move the throttle control to idling position, and 1. Move the throttle control to idling position, and allow the engine to idle for a few minutes.
Safety and operating instructions MV 500 www.CrowderSupply.com • Toll Free: 888-883-5144 Before starting maintenance on the machine, ♦ clean it in order to avoid exposure to hazardous substances. See “Dust and fume hazards” Use only authorised parts. Any damage or ♦...
Page 19
MV 500 Safety and operating instructions www.CrowderSupply.com • Toll Free: 888-883-5144 In order to ensure that the machine remains within Checking air filter the stated vibration level values, the following checks Check the engine air filter and clean the filter (A) ♦...
Safety and operating instructions MV 500 www.CrowderSupply.com • Toll Free: 888-883-5144 Check the machine's controls Check and adjust valve clearances. See the engine ♦ manual for more information. 1. Check that the throttle control (A) is not damaged and does not jam.
MV 500 Safety and operating instructions www.CrowderSupply.com • Toll Free: 888-883-5144 Check the vibration dampers. Checking the shock absorbers ♦ 1. Check all the shock absorbers (A) for cracks or if Check the engine speed. ♦ they are exhausted. There are two shock absorbers (A) on each side of the machine.
Safety and operating instructions MV 500 www.CrowderSupply.com • Toll Free: 888-883-5144 Checking the battery Check the fuel injection nozzle. See the engine ♦ manual for more information. 1. Disconnect the battery cables (A). ♦ Change the oil in the engine. See the engine 2.
MV 500 Safety and operating instructions www.CrowderSupply.com • Toll Free: 888-883-5144 Before a fuel driven machine is deposited it must be emptied and cleaned of all oil and fuel. Remaining oil and fuel must be dealt with in a way that does not adversely affect the environment.
Type at operator's ear dB(A) rel 1pW rel 1pW hours/day MV 500 electric Permitted working hours per day are calculated on action value of 2.5 m/s as per 2002/44/EC. Uncertainties, sound value Uncertainties, sound value dB(A) dB(A) Type MV 500 electric 1.5-2.5...
EC Directive 2006/42/EC (Machinery Directive) and 2000/14/EC (Noise Directive), and the harmonised standards mentioned below. Guaranteed sound power level Measured sound power level Machine [dB(A)] [dB(A)] MV 500 Electric Following harmonised standards were applied: EN500-1:2006+A1:2009 ♦ EN500-4:2006+A1:2009 ♦ Following other standards were applied: 2000/14/EC, appendix VIII ♦...