Content General information................................1 Website ....................................1 Torque range..................................1 Licenses ....................................1 CPLinQ....................................1 Product description.................................2 Operating the tool...................................2 Installation instruction................................2 Install the reaction bar ................................2 Install the socket.................................2 Tool power supply ................................2 Insert the battery (insert the battery firmly, not slowly).......................2 Remove the battery ................................2 Operating instruction ................................3 Position....................................3 Forward and reverse position.............................3...
(second start safety trigger) reference. Tool lock & finder Website Connectivity Log in to Chicago Pneumatic: www.cp.com. You can find CPLinQ information concerning our products, accessories, spare Tool m aintenance parts and published matters on our website. Tool status follow -up management...
Product description Installation instruction Install the reaction bar Install the socket 1. Second trigger 2. Principal trigger 3. Display screen 4. Settings buttons 5. Reporting LEDs 6. Forward/Reverse button 7. Reaction bar 8. Handle (gripping surface) Operating the tool Tool power supply On delivery, the battery CP36XP25 (8940176068) is in deep sleep mode.
Operating instruction Position Forward and reverse position Forward mode when the thread type is right. Reverse mode when the thread type is left. Forward mode when the thread type is left. Reverse mode when the thread type is right. Starting the tool. Fit the tool with a suitable socket.
Torque mode Access to tool menus Reduce target torque, in forward mode. To enter the menu, press the central button for 2-3 seconds. Increase target torque, in forward mode. To scroll through the menu, press the right (or left) button. In reverse mode.
Maintenance menu ( Maintenance menu ( without thresholds with thresholds To enter the maintenance menu, press the central button When maintenance thresholds are set using the mobile when you're in this screen. app, they become visible in the menus. To scroll through the menu, press the right (or left) button. Values are the global counter for tool.
Tool infos menu Select unit menu To enter the tool information menu, press the central To change the unit, press the central button when you're button when you're in this screen. in this screen. To scroll through the menu, press the right (or left) button. To return to the main page, scroll to the "Back"...
Thread type menu Angle mode (C, CQ and TC tools) To change the thread type, press the central button when For tools with version C and above, angle tightening is you're in this screen. available. To activate angle tightening, press the central button until the screen below appears.
Troubleshooting Description: one of the triggers has been released during tightening. Torque or angle achieved is shown. Flashing between the two screens. Solution: maintain both triggers Description: the "Drop Maintenance" message appears until end of tightening. when the tool detects that the number of drops exceeds the defined threshold.
Page 11
Description: the "Rehit Detected" message appears on Description: the "Low Battery" message appears when the CP86XX tools when the nut turns too little during tightening battery charge is below 25%. Solution: replace the battery (less than 3°). The bolt was already tightened before with a fully charged one.
Service & maintenance Overhaul and preventive maintenance are recommended at regular intervals. Maintenance should only be performed by qualified personnel. Information about our products, accessories, spare parts, exploded views, and published documents can be found on our website: www.cp.com. Using spare parts other than those originally supplied by the manufacturer may lead to decreased performance, Description: the "Battery Error"...
What is CPLinQ? • CPLinQ is a mobile application used to connect, configure, and monitor CP86 tools (C, CQ and TC). What should I do if the CP86 tool doesn’t start? • It provides access to detailed information about the •...
Need help?
Do you have a question about the CP86 Series and is the answer not in the manual?
Questions and answers