Windsor COMDU 1.008-612.0 Operating Instructions Manual page 17

1. Key Switch
Controls the power for machine functions.
To turn the machine power on, rotate key clockwise.
To turn the machine off, rotate key counterclockwise.
2. Reverse Button
Controls the direction of travel of the vehicle.
To travel in reverse, press the button and press either of the throttle switches.
To travel forward, release the button are press either of the throttle switches.
3. Throttle Switches
Propel the vehicle with the speed control knob setting selected. Pressing either of the switches causes the
machine to travel in the direction selected by the Reverse Button.
To travel, press either of the throttle switches.
To stop travel, release both throttle switches.
4. Speed Control Knob
Controls the speed of the machine. Speed range B is intended for carpet extraction. Speed A is intended for
interim carpet cleaning. Faster speeds are recommended for transport only, not scrubbing.
To increase speed, turn the knob clockwise.
To decrease speed, turn the knob counter clockwise.
Speeds can be adjusted at any time, whether machine is moving or not.
5. Battery Discharge Indicator
Indicates the charge level of the batteries.
The meter display is divided into 10 vertical bars. All bars illuminated indicate full charge. Bars flashing near
the left side indicate the batteries should be charged. Further operation of the machine could damage the
machine and the batteries. Bars flashing also indicate that machine has been left unattended with key on for
more than 15 minutes. Turn key off then on to reset.
6. Hour Meter
Records the number of hours the machine has been in operation (scrubbing). This information is useful in
determining when to service the machine.
7. Emergency Stop Switch (Deluxe)
This safety feature is designed to cut all power to the machine at any time.
To shut the machine power off, push the Emergency Stop Switch.
To reset the machine, rotate the switch clockwise
86400200 Operators Manual - Commodore Duo
Operations
17