Nikon KeyMission 80 Reference Manual page 97

4
Battery life
Still images
Movie recording
(actual battery life for
5
recording)
LED light
Tripod socket
Dimensions
(W × H × D)
Weight
Operating environment
Temperature
Humidity
Waterproof
Dustproof
Shockproof
All measurements are performed in conformity with Camera and Imaging Products
Association (CIPA) standards or guidelines.
1
Vibration reduction is disabled when using Still images in route shooting.
2
The camera shoots at a fixed focus when using Still images in route shooting.
3
When using Still images in route shooting.
4
Battery life does not reflect the use of SnapBridge and may vary with the conditions of
use, including temperature, the interval between shots, and the length of time that
menus and images are displayed.
5
Individual movie files cannot exceed 4 GB in size or 29 minutes in length. Recording may
end before this limit is reached if camera temperature becomes elevated.
6
Dropped from a height of 150 cm (5 ft) onto a surface of 5 cm (2 in.) thick plywood
(changes in appearance, such as paint peeling off and deformation of the drop shock
portion and waterproof performance are not subject to the test).
These tests do not guarantee that the camera will be free from damage or trouble under
all conditions.
Technical Notes
Specifications
Approx. 220 shots when using the built-in rechargeable
battery
Approx. 40 min when using the built-in rechargeable battery
Built-in
1/4 (ISO 1222) (when the optional ET-AA1 Tripod Adapter is
attached)
Approx. 44.8 × 86.5 × 15.0 mm (1.8 × 3.5 × 0.6 in.)
(excluding projections)
Approx. 74 g (2.7 oz) (including built-in rechargeable battery
and memory card)
–10°C– +40°C (14°F–104°F)
85% or less (no condensation)
JIS/IEC protection class 7 (IPX7) equivalent (under our testing
conditions)
Prevents water from entering the camera underwater up to 30
minutes at a depth of 1 m (3 ft 3 in.)
JIS/IEC protection class 6 (IP6X) equivalent (under our testing
conditions)
Cleared our testing conditions
Method 516.5-Shock
81
6
compliant with MIL-STD 810F