Removing The Battery - Nikon KeyMission 80 Reference Manual

Removing the Battery

1. Turn off the camera.
If a USB cable is connected, remove it.
If a memory card is inserted, remove it.
2. Remove four screws with a Phillips
screwdriver, and then open the memory card
slot/connector cover.
3. Use your fingers as
shown in the illustration
to remove the cover.
4. Take out the battery, and then hold the connector and pull it upward.
Recycling Used Batteries
Replace the battery when it no longer holds a charge. Used batteries are a valuable
resource. Please recycle used batteries in accordance with local regulations.
Technical Notes
Notes About Disposing of the Camera
70