The Charging Ac Adapter; Memory Cards - Nikon KeyMission 80 Reference Manual

The Charging AC Adapter

The EH-73P/EH-73PCH Charging AC Adapter is for use only with compatible devices. Do
not use with another make or model of device.
Do not use any USB cable other than the UC-E21. Using a USB cable other than the UC-E21
could result in overheating, fire or electric shock.
Do not, under any circumstances, use another make or model of AC adapter other than
the EH-73P/EH-73PCH Charging AC Adapter, and do not use a commercially available
USB-AC adapter or a battery charger for a mobile phone. Failure to observe this precaution
could result in overheating or in damage to the camera.
The EH-73P/EH-73PCH is compatible with AC 100–240 V, 50/60 Hz electrical outlets. When
using in other countries, use a plug adapter (commercially available) as necessary. For
more information about plug adapters, consult your travel agency.

Memory Cards

Precautions for Use
Use only microSD/microSDHC/microSDXC memory cards (A83).
Be sure to follow the precautions described in the documentation included with the
memory card.
Do not put labels or stickers on memory cards.
Formatting
Do not format the memory card using a computer.
The first time you insert a memory card that has been used in another device into this
camera, be sure to format it with this camera. We recommend formatting new memory
cards with this camera before using them with this camera.
Note that formatting a memory card permanently deletes all images and other
data on the memory card. Be sure to make copies of any images you wish to keep
before formatting the memory card.
If the message Card is not formatted. Format card? is displayed when the camera is
turned on, the memory card must be formatted. If there is data that you do not want to
delete, tap No. Copy the necessary data to a computer, etc. If you want to format the
memory card, tap Yes. The confirmation dialog will be displayed. Follow the on-screen
instructions to complete the operation.
Do not perform the following during formatting, while data is being written to or deleted
from the memory card, or during data transfer to a computer. Failure to observe this
precaution could result in the loss of data or in damage to the camera or memory card:
- Open the memory card slot/connector cover to remove/insert the memory card.
- Turn off the camera.
- Disconnect the AC adapter.
Technical Notes
Caring for the Product
66