Camera Setup
Setup from a Smartphone or Tablet
Before proceeding, install the SnapBridge app (Aiii) and enable
Bluetooth and Wi-Fi on your smartphone or tablet (below, "smart
device").
The camera and smart device screens shown in this manual may
differ from those of the actual products.
1
Press and hold down the shutter-release
button or the d button.
A language selection dialog will be
displayed. Tap a language to select.
The language can be changed at any
time using the Camera settings M
Language option in the setup menu
(A31).
2
Tap Set when the dialog at right is displayed.
If you do not wish to use a smart device to configure the
camera, tap Later (A14).
Getting Started
Camera Setup
12
d button
Shutter-release button
Language
Deutsch
English
Español
and set SnapBridge
later fro
the Network enu,
select Later.
Set
Later