Nikon KeyMission 80 Reference Manual page 29

3
Pair (i.e., establish a Bluetooth link between) the camera and the
smart device.
Android Devices with NFC Support
After checking that NFC is enabled on the smart
device, touch the camera Y (N-Mark) to the NFC
antenna on the smart device to launch the
SnapBridge app.
- If the SnapBridge download site is displayed,
download and install the app before repeating
the above steps.
iOS Devices and Android Devices Without
NFC Support
Tap Next on the camera screen. The camera will
wait for a connection; launch the SnapBridge app
on the smart device and follow the on-screen
instructions to tap the name of the camera you
want to pair with.
4
Check the authentication code.
After confirming that the camera and smart device
display the same six-digit authentication code,
follow the steps below to complete pairing (note
that the code may not be displayed in some
versions of iOS, but you should follow the steps
below even if the code is not displayed).
- On the camera, tap OK.
- On the smart device, tap Pairing (the name of
the button varies with the smart device).
Getting Started
Camera Setup
13
SnapBridge app.
App
SnapBridge
Ca era
Cancel
Connect to Ca era
Ca era na e
select OK.
Auth. code
000000
OK
Back
Camera