Table of Contents
Advertisement
gRoUnDIng InStRUctIonS
The ice maker must be installed with all electrical and water connections in
accordance with state and local codes. A standard (115V AC, 60 Hz, 15A) electrical
supply, properly grounded in accordance with the National Electrical Code and local
codes and ordinances, is required.
PoWER SUPPly coRD
1. If the power supply cord is too short, do not use an extension cord. Have a
qualified electrician or serviceman to install an outlet near the appliance.
2. If it is absolutely necessary to use longer cord sets or an extension cord, extreme
care must be exercised.
a) Use only a grounding type 3-wire extension cord that has a 3-blade grounding
plug and a 3-slot receptacle that will accept the plug on the appliance.
b) The marked electrical rating of the cord set or extension cord must equal to or
greater than the electrical rating of the appliance.
notE: Neither Haier nor the dealer can accept any liability for damage to the ice
maker or personal injury resulting from failure to observe the electrical
connection procedures.
Page 4 • Safety InformatIon
Hide quick links:
Advertisement
Table of Contents
