Major Functions - Haier HI50IB20SS User Manual

oPERAtIon InStRUctIonS cont.
Description of lEDs and buttons:
1. Bin full (Red) lED: Bin full indicator
light
When this is lit, the ice storage bin
is full of ice or there is something
blocking the bin-full probe. The unit
will stop working. When ice cubes are
removed from the ice storage bin,
freeing the bin-full probe, the red LED
will remain flashing for 3 minutes,
then the unit will restart and return to
the ice making mode.
2. Ice Making(green) lED: Ice making
indicator light
When this is lit, the unit is working
in the ice making mode controlled
by a temperature probe on the
evaporator. When the green LED
flashes, the unit is working in the ice
making mode controlled by a fixed
timer.
3. Ice Harvest (yellow) lED: Ice harvest
indicator light
When this is lit, the unit is working in
the ice harvest mode controlled by
the ice-full probe.
4. Mode button: Mainly for service.
When this is pressed, the ice making
mode changes to the ice harvest
mode or vice versa. The mode can be
judged from the status of the green
and yellow LEDs.
Ice Size Adjustment guide:
1. Press and hold the "Clean" button
and the "Mode" button together
for at least 3 seconds. The unit will
enter the Ice Size Adjustment mode.
The "HARVEST" LED (yellow) will be
blinking continuously during the ice
size adjustment.
2. While in the Ice Size Adjustment
mode, press the "Clean" button or
the "Mode" button for the desired
ice size.
Smaller ice setting:
By pressing the "Clean" button, you can
decrease the size of the ice cubes. The
"ICE" LED (green) will flash as you lower
the ice size and will finally be blinking at
the setting of smallest ice size.
larger ice setting:
By pressing the "Mode" button, you
can increase the size of the ice cubes.
The "BIN FULL" LED (red) will flash as
the larger size is set and will blink when
the setting of largest ice size has been
reached.
After 10 seconds without any operation,
the unit will return to the previous
mode.
notE: During the ice size adjustment,
the "BIN FULL", "ICE" and "HARVEST"
LEDS blinking all at once indicate that
the unit is in the default factory setting
of the ice size.

MAJoR fUnctIonS

1. The operating procedure is
completely automatic.
2. When the ice storage bin is full of ice
cubes, the machine stops making ice
automatically. It starts making ice
again after ice cubes are removed.
3. The different colors of the LED
display indicate various work modes.
4. A sensitive probe and accurate timer
enhance the performance of the ice
maker.
5. A compressor protection system is
built in.
Page 15 • Set uP & uSe