Revision History - Sony HCD-SHAKE5 Service Manual

HCD-SHAKE5/SHAKE6D

REVISION HISTORY

Ver. Date
1.0 2013.07 New
1.1 2013.11 Change P/N and description for Ref. no. 53 for E12 model in Page 64 and Page 84.
Change P/N and description for R1064, R1065, R1066, R1067, R1068, R1069, R1070, R1071, R1199,
R1205, R1207, R1208, R1224, R1226, R1227, R1228, R1290 and R1293 in MOTHERBOARD board.
Change P/N for FOOT, RUBBER in Page 66.
Change P/N for Ref. no. 103 in Page 65.
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input ">001Z" in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
Description of Revision
, follow the procedure below.