Subscribe to Our Youtube Channel
Related Manuals for Ltl Acorn Ltl-5511 Series
Summary of Contents for Ltl Acorn Ltl-5511 Series
- Page 1 LTL ACORN Infrared Digital Scouting Camera Ltl-5511 Series 1920X1080 Resolution Video with Audio Record USER’S MANUAL...
-
Page 3: Table Of Contents
3.7 View Local MPNO Name and Signal Strength on TFT LCD Screen …………… 23 ……… … ………………………………………………… 24 3.8 Camera Working with MMS Ltl-5511 Series Products ……………………………………………………………………… 26 …… … … … … … … … ………………………………………………… 26 4.1 Models for Purchase Important Information …………... -
Page 4: General Information
• In “Cam + Video” mode, camera takes both pictures and video at every trigger event. up to 6 months with 12 ×AA batteries). • LTL ACORN unique two horizontal PIR patented design comes up with a 100° angle of induction, makes our camera activated in advance and gets ready to shoot, this split-second process could be short as 0.2 second. -
Page 5: Application
• Advanced Remote Cellular Technology transmits images to your cell phone and/or email account constantly at lower battery consumption and shorter transmission time, compared to similar products on the market. • Get SMS Text alert when battery power level gets low. •... - Page 6 Push to open/close Cover of the Battery the battery Compartment compartment cover DC Power SD Card TV Out USB Port Power/Mode Slot Jack Jack Switch Figure 1.2: Bottom View of Ltl-5511M The camera provides the following connections for external devices: USB 2.0 port, SD card slot, TV out jack, and external DC power in jack. The 3-way Power/Mode Switch is used to select the main operation modes: OFF, ON and TEST.
- Page 7 Figure 1.3: Back View of Ltl-5511M and Front View of Battery Box(Part # Ltl-MM3) CAUTION: If you are not using the camera for an extended period of time, it is highly recommended to remove the batteries from the camera to avoid possible acid leak that may damage the camera and void the warranty.
-
Page 8: Quick Start
QUICK START 2.1 Insert SIM Card (Only for Model Ltl-5511MG/WMG) You need to purchase the SIM card from your local Mobile Phone Network Operators (MPNO), making sure they provide Multimedia Messaging Service (MMS). Ask them for 3.4 Set up MMS Function on PC in the Advanced Operation section.) Open the battery compartment cover, slide the SIM card in the slot and lock it. -
Page 9: Insert Sd Card
• Replace the cover. To install the additional battery box (Part # Ltl-MM3), please refer to Appendix III: Instructions For Installing Battery Box) Alternatively the camera can run on an external 6V~12V DC power source (optional). When both external power and batteries are connected, the camera will be powered by the external one preferentially. - Page 10 2.4 Enter Test Mode Switch to the TEST position to enter the Test mode. In this mode you can take pictures or video clips like a regular digital camera, or enter the Menu to set up parameters. On the keypad there are four “shortcut” functional keys (see Figure 2-3) working as below: Figure 2-3 •...
-
Page 11: Enter Test Mode
PIR sensor working. When game is detected by the PIR sensor, the camera is powered on time. The trigger time varies from different scouting camera brands in the market, generally from 1.3 to 5 plus seconds. Our LTL ACORN scouting camera has an impressive 1 second trigger time. - Page 12 .While our LTL ACORN scouting camera can catch the complete picture. different levels of electromagnetic interference in different environment. Our LTL ACORN scouting camera designed with two horizontal PIR sensors, it takes picture or video only when two side PIR both been triggered, thus to avoid wrong shoot by the shortage of anti- interference capability on single PIR.
-
Page 13: Advanced Settings
ADVANCED SETTINGS The LTL ACORN trail camera comes with preset manufacturer settings. You can change the settings to meet your requirements. Please make sure the camera is in the TEST mode. 3.1 Parameter Settings Press “MENU” key to enter/exit the menu. Press... - Page 14 Press Enter to set up date and time. Internal capacitor will retain the clock Set Clock Enter time for up to 7 minutes when changing batteries. Select the number of photo taken at 01 Photo, 02 Photos, Picture No. every trigger in Camera mode. Please 03 Photos also refer to the Interval parameter .
- Page 15 Select On if you only want the camera every day. For instance, if the starting time is set at 18:35 and the ending time at 8:25, the camera will function Timer 1 Off, On from 18:35 the current day to 8:25 the next day.
-
Page 16: File Format
Or insert the SD card into the computer (a SD card reader may be needed). Get enclosed CD from gift box and run on computer (an external disc drive would be Or download from LTL ACORN’s website: http://www.ltlacorn.cn/about/downloaden.html The following Setup.exe illustration:... - Page 17 Click on Setup.exe, and you will see the following interface: Select your language and model. Click on Camera Setup , and you will see the following menu:...
- Page 18 Set up the camera based on your own need. Please refer to Section 3.1 Parameter Settings Set up the camera based on your need. Click on to retrieve the computer time. Click on to choose the directory to save your settings, usually under the root directory of the SD card (You need to insert the SD card in the SD card reader and plug it in your computer.) Then, click on...
-
Page 19: Set Up Mms Function On Pc
3.4 Set up MMS Function on PC On the main menu, Select Ltl 5511MG and press MMS Setup. - Page 20 MMS Status, choose among three options: “VGA”, “SMS”, and “OFF”. • VGA: the camera will send 640×480 pictures to your phone or e-mail account • SMS: the camera will send only texts to you • OFF: the camera will not send anything Then you need to choose how you like to set up the MMS Mode --Auto or Manual.
-
Page 21: Set Up Smtp Function On Pc
Click on and back to main menu. Retrieve the SD card and insert it in the camera. Switch to the TEST position to enter the TEST mode. Message“Updated setup.dat installed on the camera. 3.5 Set up SMTP Function on PC On the main menu, Select Ltl 5511MG and press SMTP Setup. - Page 22 Display below: For the camera to send pictures, SMTP status must be set to “VGA”. “SMS” indicates sending texts and “OFF” means nothing will be sent. In Auto Manual APN / Account /Password Fill in your E-mail server / port / sender E-mail / Password /Recipients E-mail and SMS Phone NO.
- Page 23 Under SMS remote control, the value ranges from “0”to “off” and denotes the frequency the camera wakes up to either receive or execute the commands. “0” indicates that the camera will wake up and search for commands automatically every 10 minutes, and send feedback once it receives them.
-
Page 24: Mms Remote Control & Table Of Command Code
Or download the SMS Remote Control APP from LTL ACORN’s website (www.ltlacorn.cn) to send SMS commands, please refer to the Instruction of SMS Remote Control APP for operation details. - Page 25 Order Code Value Example Meaning Code Mode: camera (0), video (1), camera+ video 01*1# Set to video mode Image size: 12MP (0), 5MP (1), 2MP (2) 02*1# Video size: 1080P(0),720P (1), VGA (2) 03*1# Number of Pictures per Trigger: 1 photo (0), 04*2# 3 photos 2 photos (1), 3 photos (2)
-
Page 26: View Local Mpno Name And Signal Strength On Tft Lcd Screen
Camera functions Timer 2: Off (0), On (1). Time indicated by 2 only between 18*113301530# digits. Example: 13h 30m becomes 13 30. 1:30pm ~3:30pm when triggered. Camera wakes up every two SMS command receiving time. 0: every 10 19*2# hours and search minutes;... -
Page 27: Camera Working With Mms
Signal strength can be full 6 columns. To make the MMS module to work, at least two bars are required. If you only see one bar, the reception is too weak for the MMS to function. Some U.S. AT&T customers will see a six-digit number (310410), instead of the operator’s symbol, next to the signal bars. - Page 28 need pre-paid balance in the account.) The SIM card is not password-protected. email account is entered correctly. It is recommended that you take the receiving phone with you and perform a test on site. • The Timer function is OFF. Or if you have the Timer ON, make sure you are in the •...
-
Page 29: Ltl-5511 Series Products
Ltl-5511 SERIES PRODUCTS 4.1 Models for Purchase: • Ltl-5511MC=Ltl-5511M Camera(with FOV of 55 degrees)+Ltl-BM2 Standard Battery Box • Ltl-5511WMC= Ltl-5511M Camera(with FOV of 100 degrees)+Ltl-BM2 Standard Battery Box • Ltl-5511MG=Ltl-5511M Camera(with FOV of 55 degrees)+Ltl-MM3 MMS-Module Battery Box • Ltl-5511WMG=Ltl-5511M Camera(with FOV of 100 degrees)+Ltl-MM3 MMS-Module... - Page 30 Ltl-5511M Camera(with FOV of 100 degrees) Ltl-MM3 MMS-Module Battery Box...
-
Page 31: Important Information
Don't touch with metal objects 5.2 Power Supply and Battery Box Ltl-5511 series camera can work on up to 12 voltages. 4xAA batteries in the camera, 4xAA batteries (Or 8xAA alkaline batteries. Or 2 cells of 18650 size lithium battery) in the battery box (Batteries must lean to one side without empty in the middle), and the external power supply form a three-path parallel circuit. -
Page 32: Auto Adjustment On Video Length
5.4 Auto Adjustment on Video Length To extend the battery life, we strongly suggest to use additional battery box when having the camera running in Video mode or Cam+Video mode. Compared to other brand hunting camera on the market, our camera takes thirty percent more full-length video clips. Besides that, when battery power gets low, our camera automatically shortens the video length so as to take more clips of more game. -
Page 33: Firmware Upgrades
FIRMWARE UPGRADES 6.1Firmware Upgrades steps below to implement the upgrades: Install batteries and the SD card . Back up SD card comtents. Format SD card on cmera. Retrieve the SD card and plug it in your computer (SD card reader may needed). Copy the two files to the root directory of the SD card, put the card switch to the “LOCK”... -
Page 34: Warranty Information
LIMITED WARRANTY We take great pride in our products. We always stand behind our promises. We provide leading warranty term and service. Every LTL ACORN trail camera comes with a limited times warranty. We guarantee our trail cameras to be free of defects in materials and workmanship under normal use and service for a period of a limited time after the registered date of purchase. - Page 35 Appendix I: TECHNICAL SPECIFICATION Ltl- Ltl- Ltl- Item Parameters Ltl-5511MC 5511WMC 5511MG 5511WMG 5 Mega Pixels Color Image Sensor CMOS Lens FOV=55°; Auto IR-Cut Lens FOV=100°; Auto IR-Cut 850nm LED IR Flash T ̋ LCD Screen Color Operation 6 Keys Keypad Memory SD Card (8MB ~16GB)
- Page 36 1-60sec.; Video Length Programmable Camera + First take Picture then Video Video Playback 1~16 Times Zoom In On/Off; Include serial No., temperature and Time Stamp moon phase, date and time Timer1 On/Off; Programmable Timer2 On/Off; Programmable Password 4-Digit Numbers(0~9); 4 digits(0~9) and/or Device Serial alphabets(A~Z) set by yourself;...
- Page 37 4xAA alkaline batteries in the camera; 4xAA alkaline batteries (Or 8AA alkaline batteries, Or 2 cells Power Supply of 18650 size lithium battery) in the battery box (Batteries must lean to one side without empty in the middle). External DC Plug Size: 4.0x1.7 Power Supply 6 ~ 12V (1 ~ 2A)
-
Page 38: Appendix Ii Package Contents
Appendix II: PACKAGE CONTENTS Quantity (Ltl- Quantity (Ltl- Quantity (Ltl- Quantity (Ltl- Part Name 5511MC) 5511WMC) 5511MG) 5511WMG) Digital Camera Ltl-BM2 Standard Battery Box Ltl-MM3 MMS-Module Battery Box AV Cable USB Cable Strap External DC Cable (optional) Warranty Card User’s Manual ATTENTION: BATTERY IS NOT INCLUDED IN OUR PACKAGE. -
Page 39: Appendix Iii Instruction For Installing Battery Box
Appendix III: INSTRUCTION FOR INSTALLING BATTERY BOX 1. Below pictures are 3 different battery installations (Do not mix lithium battery with AA alkaline battery) - Page 40 2. Combine the two parts Combined 3. Hook camera body with two lock buckles on side of battery box Hooked...
-
Page 41: Appendix Iv Instruction For Installing Camera With Battery Box
4. Snap on lock buckles Snap On Appendix IV: INSTRUCTION FOR INSTALLING CAMERA WITH BATTERY BOX 1. Mount on tripod The camera can be mounted on a 1/4" tripod. Fix the camera to tripod by screw up the nut, and then adjust shooting angle. Screw Nut... - Page 42 2. Mount on tree trunk Fits holes on battery box with four tiny plastic bolts can avoid cameras being slipped off from tree and loose. Then across stripe holes with a strap, mount the camera on tree trunk. Besides, to avoid cameras being stolen and damaged, use a chain and lock to keep it safe if possible.
Need help?
Do you have a question about the Ltl-5511 Series and is the answer not in the manual?
Questions and answers