Table of Contents
Advertisement
3.2.4
Removing the Switch Panel
Prerequisite condition: 3.2.3
Switch panel spring
Tab(B)
Tab(A)
* Marked with square area are
sealed with tape.
Figure3- 9
1. Pull down the four tabs from inside, then detach the tape sealing.
2. Remove the switch panel.
Switch panel
Switch panel spring
Figure3- 10
Caution:
When installing the switch panel ,ensure the switch panel spring is placed on the
upper case.
REV.A
3-10
Advertisement
Table of Contents
Troubleshooting
