Built-In Cd Player; Playing A Cd - Pioneer FH-P6200 Operation Manual

Section
06

Built-in CD Player

Playing a CD

These are the basic steps necessary to play a
CD with your built in CD player. More ad
vanced CD operation is explained starting on
the next page.
WARNING
Do not use with the front panel left open, after
ejecting a CD. If you do leave it open, it may result
in injury in the event of an accident.
1 Track number indicator
Shows the track currently playing.
2 Play time indicator
Shows the elapsed playing time of the cur
rent track.
1 Press CD EJECT.
CD loading slot appears.
# After a CD has been inserted, press SOURCE
upward or downward to select the built in CD
player.
2 Insert a CD into the CD loading slot.
Front panel is closed automatically, and play
back will start.
16
En
1
2
CD loading slot
# You can eject a CD by pressing CD EJECT.
3 Use VOLUME to adjust the sound level.
Press VOLUME on the head unit upward to in
crease the volume, and press downward to
lower the volume.
4 To perform fast forward or reverse,
press and hold c or d.
5 To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur
rent track. Pressing again will skip to the pre
vious track.
Notes
! The built in CD player plays one, standard, 12
cm or 8 cm (single) CD at a time. Do not use
an adapter when playing 8 cm CDs.
! Do not insert anything other than a CD into
the CD loading slot.
! A CD left partially inserted after ejection may
incur damage or fall out.
! If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press CD EJECT to eject the disc, and check
the disc for damage before inserting the disc
again.
! If the built in CD player does not operate prop
erly, an error message such as CD ERR-11