Recalling Sound Field Programs; Adjusting Bbe Sound Level; Using The Graphic Equalizer; Recalling Equalizer Curves - Pioneer FH-P6200 Operation Manual

Digital Signal Processor

Recalling sound field programs

Here is a list of the sound field programs:
Button Display
1 STUDIO
2 JAZZ CLUB
3 CLUB
4 BBE
1 Press DSP to select the sound field con-
trol.
Press DSP until SFC appears in the display.
# If the sound field control has been previously
set to a sound field program then the title of that
previously selected sound field program will be
displayed instead of SFC.
2 Select a sound field program by press-
ing 14.
Select the desired sound field program by
pressing one of the numbered buttons, from
14, which correspond to the different sound
field programs as listed above.
# You can also sequentially select a sound field
program by pressing c or d.

Adjusting BBE sound level

With BBE sound processing technology, you
can adjust the level of BBE.
1 Recall BBE.
See Recalling sound field programs on this
page.
2 Press a or b to adjust the level of BBE.
Each press of a or b increases or decreases
the level of BBE.
+4  4 is displayed as the level is increased
or decreased.

Using the graphic equalizer

The graphic equalizer lets you adjust the
equalization to match car interior acoustic
Effect
characteristics as desired.
Studio
Jazz club

Recalling equalizer curves

Club
There are seven stored equalizer curves which
BBE
you can easily recall at any time. Here is a list
of the equalizer curves:
Display
S-BASS
POWER
NATURAL
VOCAL
FLAT
CUSTOM1
CUSTOM2
! CUSTOM1 and CUSTOM2 are adjusted
! When FLAT is selected no supplement or
1
zer.
Press DSP until POWER appears in the dis
play.
# If the graphic equalizer has been previously
set to an equalizer curve other than POWER then
the title of that previously selected equalizer
curve will be displayed instead of POWER.
Equalizer curve
Super bass
Powerful
Natural
Vocal
Flat
Custom 1
Custom 2
equalizer curves that you create. Adjust
ments can be made with a 9 band graphic
equalizer.
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
Press DSP to select the graphic equali-
Section
09
33
En