Using Automatic Sound Levelizer - Pioneer FH-P6200 Operation Manual

Digital Signal Processor
Button Display Indicator
a FRONT
b ALL
c FRONT-L
d FRONT-R
1 Press DSP to select the position selec-
tor.
Press DSP until POSI appears in the display.
# If the position selector has been previously set
to a listening position then the title of that pre
viously selected listening position will be dis
played instead of POSI.
2 Press c/d/a/b to select a listening po-
sition.
Press one of these, c/d/a/b, to select a lis
tening position as listed in the table.
# To cancel the selected listening position,
press the same button again.
Using automatic sound
levelizer
During driving, noise in the car changes ac
cording to the driving speed and road condi
tions. The automatic sound levelizer (ASL)
monitors such varying noise and automati
cally increases the volume level, if this noise
becomes greater. The sensitivity (variation of
volume level to noise level) of ASL can be set
to one of five levels.
1 Press DSP to select ASL.
Position
Press DSP until ASL appears in the display.
Front seats
2 Press a to turn ASL on.
ASL : MID appears in the display.
# To turn ASL off, press b.
All seats
3 Press c or d to select the desired ASL
level.
Each press of c or d selects ASL level in the
Front seat left
following order:
LOW (low)MID-L (mid low)MID (mid)
MID-H (mid high)HIGH (high)
Front seat
right
Section
09
35
En