Safety Guidelines - Siemens SITRANS Probe LU Quick Start Manual

SITRANS Probe LU (PROFIBUS PA) Quick
Start Manual
This manual outlines the essential features and functions of the SITRANS Probe LU (PROFIBUS PA).
We strongly advise you to acquire the detailed version of the manual so you can use your
instrument to its fullest potential. The complete manual can be downloaded from the Siemens
website at: www.siemens.com/level. The printed manual is available from your local Siemens
representative.
Questions about the contents of this manual can be directed to:
Siemens Milltronics Process Instruments
1954 Technology Drive, P .O. Box 4225
Peterborough, Ontario, Canada, K9J 7B1
Email: techpubs.smpi@siemens.com
Copyright Siemens Milltronics
Process Instruments 2013.
All Rights Reserved
We encourage users to purchase
authorized bound manuals, or to view
electronic versions as designed and
authored by Siemens Milltronics Process
Instruments. Siemens Milltronics
Process Instruments will not be
responsible for the contents of partial or
whole reproductions of either bound or
electronic versions.
MILLTRONICS is a registered trademark of Siemens Milltronics Process Instruments.

Safety Guidelines

Warning notices must be observed to ensure personal safety as well as that of others, and to
protect the product and the connected equipment. These warning notices are accompanied by
a clarification of the level of caution to be observed.
WARNING: relates to a warning symbol on the product, and means that failure to
observe the necessary precautions can result in death, serious injury, and/or
considerable material damage.
1
WARNING : means that failure to observe the necessary precautions can result
in death, serious injury, and/or considerable material damage.
means important information about the product or that part of the operating manual.
Note:
1.
This warning symbol is used when there is no corresponding caution symbol on the product.
A5E32081626 SITRANS Probe LU (PROFIBUS PA) – QUICK START MANUAL
Disclaimer of Liability
While we have verified the contents of this manual
for agreement with the instrumentation described,
variations remain possible. Thus we cannot
guarantee full agreement. The contents of this
manual are regularly reviewed and corrections are
included in subsequent editions. We welcome all
suggestions for improvement.
Technical data subject to change.
1
Page EN-1