Residual Heat Indicator; Rapid Heating - Siemens HB 750.50 B User Manual

Note
Residual heat
indicator
Using the residual heat

Rapid heating

Setting procedure
The rapid heating process
is complete
You can change the setting while the symbol is
flashing. The setting has been adopted if the symbol
lights up permanently. You may change the waiting
time that elapses before the setting is adopted. See
the Basic settings section for more details.
When you switch off the oven, the residual heat in the
oven is indicated in the preheating indicator.
When all segments are lit, the temperature in the oven
is approximately 300 ºC.
The preheating indicator goes out when the
temperature has fallen to approximately 60 ºC.
You can keep food warm in the oven using the
residual heat.
For meals with long cooking times, you may switch off
the oven 5 to 10 minutes earlier. The residual heat will
finish cooking the meal, thereby saving energy.
This allows you to heat up the oven particularly
quickly.
1.
Switch the function selector to rapid heating z.
2.
Use the temperature selector to set the required
temperature.
The oven switches on after a few seconds. The
Z symbol lights up in the display.
You will hear a short signal. The Z symbol disappears.
Put your meal in the oven and set the oven.
19