Replacing The Oven Light - Siemens HB 750.50 B User Manual

Problem
The Er 1" or Er 4" error
message appears in the clock
display.
The Er 2" error message
appears in the clock display.
The Er 6" error message
appears in the clock display.
You have set self cleaning.
The oven door cannot be
opened. The Er 7" error
message appears in the clock
display.
The Er 11" error message
appears in the clock display.
Replacing the oven
light
Method
Possible cause
The temperature sensor
has failed.
Incorrect mains connection. Switch off the fuses in the fuse box and
The lock on the oven door
is defective.
The oven door release
mechanism is faulty.
A button has been pressed
for too long or a button has
jammed.
Repairs may only be carried out by fully trained
after sales service technicians.
Improper repairs may constitute serious hazards to
the user.
If the oven light fails, it must be replaced. 40 watt
heat-resistant spare bulbs can be obtained from the
after-sales service or specialist shops.
Only use these bulbs.
1.
Switch off the oven fuse in the fuse box.
2.
Place a tea towel in the cold oven to prevent
damage.
3.
Remove the glass cover. To do this, press back
the metal tab with your thumb. Figure A.
Comments/remedy
Contact the after sales service.
connect the cooker properly.
Switch off the function selector and call
the after sales service. All other oven
functions can be used.
Contact the after sales service.
Press all buttons separately. If the error
message remains, please contact the
after sales service.
33