Table of Contents
Advertisement
Battery Replacement
It is highly recommended that the battery be replaced every 12 months, or prior to logging critical data.
The TH10 does not lose its stored readings when the battery weakens or when the battery is replaced; the data
logging process will however be stopped and cannot be re-started until the battery has been replaced and the
logged data has been downloaded to PC.
Use only 3.6V lithium batteries. Before replacing the battery, remove the datalogger from the PC. Follow
diagrammatic steps 1 through 4 below.
NOTE: Leaving the RHT10 plugged into the PC USB port longer than necessary will cause some of the battery
capacity to be lost.
1
You, as the end user, are legally bound (Battery ordinance) to return all used batteries and
accumulators; disposal in the household garbage is prohibited!
You can hand over your used batteries / accumulators at collection points in your community or
wherever batteries / accumulators are sold!
Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the end of its
lifecycle
2
Copyright © 2012 Extech Instruments Corporation
All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com
3
5
4
TH10-EU-EN V1.2 7/12
Advertisement
Table of Contents
Need help?
Do you have a question about the TH10 and is the answer not in the manual?
Questions and answers