Advertisement
Advertisement
Table of Contents
Related Manuals for Extech Instruments TH10
Summary of Contents for Extech Instruments TH10
- Page 1 USER MANUAL Temperature Datalogger Model TH10...
- Page 2 Introduction Thank you for selecting the Extech Instruments Model TH10 Temperature Datalogger that measures and stores up to 32,000 temperature readings. The user can easily set up the logging rate, high/low alarm limits start-mode, and download the stored data by plugging the module into a PC's USB port and running the supplied PC software.
- Page 3 No data will be lost. To save power, the TH10’s LED flashing cycle can be changed via the supplied software. To save power, alarm LEDs for temperature can be disabled via the supplied software. *** LED status indication alternates every cycle. For example: If there is one alarm, the REC LED blinks for one cycle and alarm LED will blink for next cycle.
-
Page 4: Specifications
LED flash cycle is 10 second. Caution: When the TH10 is logging and the memory is full, press the orange button in the meter housing for 6 seconds until the red LED flashes. This will stop the logging and delete the contents of the memory. -
Page 5: Battery Replacement
It is highly recommended that the battery be replaced every 12 months, or prior to logging critical data. The TH10 does not lose its stored readings when the battery weakens or when the battery is replaced or removed; the data logging process will however be stopped and cannot be re-started until the battery has been replaced and the logged data has been downloaded to PC. -
Page 6: Two Year Warranty
Two-year Warranty Teledyne FLIR warrants this Extech brand instrument to be free of defects in parts and workmanship for two years from date of shipment (a six-month limited warranty applies to sensors and cables). To view the full warranty text please visit: http://www.extech.com/support/warranties.
Need help?
Do you have a question about the TH10 and is the answer not in the manual?
Questions and answers