Table of Contents
Advertisement
2.11.8
Enabling Cast Screen
When and where to use: Use this procedure to enable the LEX device to project the screen to a TV or
other device.
Procedure:
1 From the Home screen, tap
2 Tap
.
3 Tap Display.
4 Tap Cast.
5 Tap .
6 Select Enable wireless display.
Return to Process
Setting the Display
on page 54
Related Links
Projecting the LEX Screen on Another Device
2.11.8.1
Projecting the LEX Screen on Another Device
Prerequisites: Cast screen must be enabled. For more information, see
page
59.
When and where to use: Use this procedure to project the device screen on another device.
Procedure:
1 From the Home screen, tap
2 Tap
.
3 Tap Display.
4 Tap Cast.
5 Select the device on which you want to show your device screen.
Your device should now display on the other device.
6 To stop projecting your device screen, swipe down from the Status bar and tap Disconnect
under Cast.
Return to Process
Enabling Cast Screen
on page 59
2.12
Sound and Notification Settings
Sound and notification settings allow the user to configure default media, alarm, and ring volume levels
and ringtones. The user can adjust notification settings.
Send Feedback
.
on page 59
.
MN003477A01-A
Chapter 2: Getting Started
Enabling Cast Screen on
59
Advertisement
Table of Contents
Troubleshooting
