Charging Information; Charging Temperature; Figure 8: Charging The Lex Device - Motorola LEX L10ig User Manual

MN003477A01-A
Chapter 2: Getting Started
3 Slide the Battery Lock up and hold it.
4 With the tip of your finger, lift up the battery from the side closest to the top side of the device.
Return to Process
Setting Up on page 32
2.4

Charging Information

Before using for the first time, charge the battery using the provided USB Charger and USB Cable or
connect the USB Cable to the USB port of a personal computer. An unused battery fully charges in
less than six hours.
The battery can also be charged by one of the optional charging cradles.

Figure 8: Charging the LEX Device

NOTICE: Keep the USB cover closed when USB not in use.
NOTICE: For detailed description, installation and operation of the LEX device accessories,
refer the quick start guides provided with each accessory.
Return to Process
Getting Started on page 29
Related Links

Charging Temperature

on page 38
Battery Charge Indicators
Battery Management on page 40
2.4.1
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Note that charging is intelligently
controlled by the device.
To accomplish this, for small periods of time, the device alternately enables and disables battery
charging to keep the battery at acceptable temperatures. The device LED indicates when charging is
disabled due to abnormal temperatures by fast blinking amber (once every 2 seconds).
38
on page 39
Send Feedback