Advertisement
Using the Optional Docking Cradle
A system that is installed in the silicone sleeve can be used with
the optional docking cradle.
To attach it to the docking cradle,
visually align the connector on the
bottom of your slate with the
connector on the docking cradle
(Fig. 5). While holding the top
away from the cradle, push both
corners down at the same time.
Do not push too hard, or the
connectors may be damaged. Lay
the top of the system against the
cradle. When properly installed,
the tablet will rest on the small
risers on the base of the cradle;
there should be a small gap
between the bottom of the tablet
and the base of the cradle.
For more information, call 1-800-FUJITSU or visit our Web site at:
www.ShopFujitsu.
For technical support call:1-800-8FUJITSU (1-800-838-5487)
Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu
Ltd. All other trademarks mentioned herein are the property of
their respective owners.
reserved.
4
Fujitsu America, Inc.
1250 E. Arques Avenue,
Sunnyvale, California 94085
© 2011 Fujitsu America, Inc. All rights
B6FY-0761-01EN-00
Figure 5. Docking System
Advertisement
