Advertisement
3.
Due to the secure fit of the sleeve, the unsecured corners of
the sleeve must be bent backwards to allow the system to
be laid into it, after which the corners are bent back over
the system corners to secure them (Figure 4).
Bend corner back
with both hands.
When the system is
lying flat, bend the corner
back over the system corner.
Pen Holder
The silicone sleeve has a handy pen holder located at the top
(Figure 2). It's good practice to stow your pen when not in use in
order to prevent damage to it.
Lanyard / Pen Tether
The pen tether attachment point on the system is exposed so
that you can secure the pen tether that was included with your
system and/or the lanyard that was included with the sleeve
when the system is installed in the sleeve. See the system user
guide for installation instructions.
Optional Hand Strap
An optional hand strap is available as an accessory. When the
system is installed in the silicone sleeve, the hand strap can be
attached to the threaded inserts through the holes in the back of
the sleeve (Figure 2).
Figure 4. Securing Corners
3
Advertisement
