Frost Protection - Kärcher B 40 C Bp Classic Operating Instructions Manual

DANGER
Risk of explosion. Do not place tools or the
like on the battery, i.e. on the terminal poles
and cell connectors.
Risk of injury. Ensure that wounds never
come into contact with lead. Always clean
your hands after having worked with batter-
ies.
Recommended batteries
Order No. Description
X -- 6.654-093.0 76 Ah - main-
2)
tenance-free
X -- 6.654-290.0 80 Ah, - low
3)
maintenance
X X 6.654-141.0 105 Ah -
1)
maintenance-
free
-- X 6.654-212.0 170 Ah -
maintenance-
free
-- X 6.654-124.0 180 Ah -
maintenance-
free
-- X 6.654-086.0 180 Ah, - low
maintenance
* Appliance requires 2 batteries
Complete set (24 V/105 Ah) incl. connect-
1)
ing cable, order no. 4.035-449.0
Complete set (24 V/76 Ah) incl. connect-
2)
ing cable, order no. 4.035-447.0
Complete set (24 V/80 Ah) incl. connect-
3)
ing cable, order no. 4.035-990.0
Insert batteries and connect
 Push the appliance forward about 2 m
so that the steering rollers point toward
the rear.
 Lower the cleaning head.
 Empty the fresh and waste water tank.
 Loosen the tank lock and tilt the tank
upwards.
 Place the batteries in the tub so that
they are flush with the cleaning head,
insert the accompanying retaining
blocks or foam material parts to safe-
guard them.
CAUTION
When the batteries are installed and re-
moved, the stability of the appliance can be
compromised; ensure a safe stance.
 Connect the connection cable to the
free battery poles (+) and (-).
 Connect pole using the enclosed con-
necting cable.
ATTENTION
Pay attention to correct poles.
12 V*
12 V*
12 V*
Installation sketch for 2 batteries
 Swivel the water reservoir all the way
down, check the lock.
6 V
Note:
Charge the batteries before commissioning
the appliance.
6 V
See also "Charging the batteries".
Removing the batteries
ATTENTION
6 V
‫ ‏‬R isk of damage due to tipping appliance;
remove batteries only if the appliance is
equipped with a cleaning head.
 Set the programme selector switch to
"OFF".
 Push the appliance forward about 2 m
so that the steering rollers point toward
the rear.
 Lower the cleaning head.
 Loosen the tank lock and tilt the tank
upwards.
 Clamp off the minus pole of the battery.
 Clamp off the remaining cables from the
battery.
 Remove the support blocks or the foam
pieces.
CAUTION
When the batteries are installed and re-
moved, the stability of the appliance can be
compromised; ensure a safe stance.
 Remove the batteries.
 Dispose of the used batteries according
to the local provisions.
Maintenance contract
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.

Frost protection

In case of danger of frost:
 Empty the fresh and waste water tank.
 Store the appliance in a frost-protected
room.
EN
7
-
19