Cisco TelePresence MX200 G2 Installation Manual page 7

Installing Cisco TelePresence MX200 G2 - Wheel Base
6
Mount the back cover
E
78-100248-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved.
Lift this handle to
lock/unlock the back
cover. Use both
hands if required.
Wind up the cables on the hook on the
back cover when rolling the unit. Also
hang the Touch controller on the hook.
EMC Class A declaration
WARNING: This is a class A product. In a domestic environment this
product may cause radio interference in which case the user may be
required to take adequate measures.
声 明
此为A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种
情况下，可能需要用户对其干扰采取切实可行的措施。
WARNING: This is a class A product. In a domestic environment
this product may cause radio interference in which case the user
may be required to take adequate measures.
Cisco has more than 200 offices worldwide.
Find an overview of the offices on the Cisco web site at
http://www.cisco.com/go/offices
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or
its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to
this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the
property of their respective owners. The use of the word partner does not imply a
partnership relationship between Cisco and any other company. (1110R)
7